Ives Heavy Duty Offset Top Pivot 7237F Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Meubles Ives Heavy Duty Offset Top Pivot 7237F. Ives Heavy Duty Offset Top Pivot 7237F User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
7230F and 7237F
3/4” Heavy Duty Intermediate Pivot
Improper pivot set installation can lead to personal injury or property damage. Follow
all instructions carefully. For questions contact Technical Support at 1-888-371-7331.
CAUTION
!
1. Prepare and mortise hinge stile of door and hinge side jamb to receive pivot set. Determine
pivot location using dimensions on reverse side. The pivots are handed and must match
hand of door. To determine hand of door and proper pivot position, see diagrams above.
Install top and bottom pivot sets before installing intermediate pivot.
2. Locate, drill, and tap 1/4-20 mounting holes for metal door or metal frame. Locate and drill
pilot holes for #14 wood screws for wood door or wood frame. Then hang door.
3. Open door about 90°. Install pivot leafs with 1/4-20 x 3/4” FHMS or #14 FHWS screws provided.
4. The door weight should be balanced between bottom and intermediate pivots. Refer to
diagram above. To adjust intermediate pivot:
A. Use 5/32” Allen wrench to remove pivot cap from frame leaf.
B. Insert Allen wrench into pivot pin height adjuster.
C. Turn clockwise until pivot pin makes contact with steel ball inside door leaf.
D. Adjust carefully to balance the weight of the door.
5. Re-install pivot cap.
Left hand
installation
Right hand
installation
Right hand
installation shown;
left hand opposite
Door leaf
Frame
leaf
5/32” Allen
wrench
Pivot
cap
Pivot pin height
adjuster
Installation Instructions
26365 Rev. 3 © 2006 Ingersoll-Rand Company Limited
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Installation Instructions

7230F and 7237F 3/4” Heavy Duty Intermediate PivotImproper pivot set installation can lead to personal injury or property damage. Followall instructio

Page 2 - 26365-00

26365 Rev. 3Right hand installation shown;left hand oppositeIt is very important for installer to verify that center line of intermediate pivot pointl

Commentaires sur ces manuels

Pas de commentaire