Ives Offset Jamb Mount Top Pivot 7212V Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Meubles Ives Offset Jamb Mount Top Pivot 7212V. Ives Offset Jamb Mount Top Pivot 7212V User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
7212V 3/4” Offset Jamb Mount Top Pivot
Improper pivot set installation can lead to personal injury or property damage. Follow
all instructions carefully. For questions contact Technical Support at 1-888-371-7331.
CAUTION
!
1. Prepare and mortise top of door and side jamb to receive pivot set. Determine pivot location
using dimensions on reverse side. The pivots are handed. To determine hand of door and
proper pivot position, see diagrams above.
2. Locate, drill, and tap 1/4-20 mounting holes for metal door or metal frame. Locate and drill
pilot holes for #14 wood screws for wood door or wood frame. Install pivot leafs with
1/4-20 x 3/4” FHMS or #14 FHWS screws provided.
3. Loosen set screw in pin leaf with 3/32” Allen wrench provided and remove pivot pin.
4. With door in open position (about 90° to jamb), carefully fit door onto bottom pivot at a slight
angle. Tip door into vertical position, aligning top pivot leafs in door and jamb. With pivot
leafs aligned, insert pivot pin into pivot set. Vertically align groove in pivot pin with set
screw in pivot leaf. Tighten set screw securely with 3/32” Allen wrench.
5. To remove door from jamb: Use 3/32” Allen wrench to loosen set screw in door pivot leaf.
Pull pivot pin out of pivots. Door can now be removed from opening.
Right hand
installation
Left hand
installation
Jamb
leaf
Set
screw
3/32” Allen
wrench
Pivot
pin
Door
leaf
Right hand
installation
shown; left
hand opposite
Installation Instructions
31582 Rev. 4 © 2006 Ingersoll-Rand Company Limited
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Installation Instructions

7212V 3/4” Offset Jamb Mount Top PivotImproper pivot set installation can lead to personal injury or property damage. Followall instructions carefully

Page 2 - 31582-00

31582 Rev. 4It is very important for installer to verify that center line of top pivot point lines upwith center line of bottom pivot point before fin

Commentaires sur ces manuels

Pas de commentaire