Ives Offset Top Pivot 7226/26F Manuel d'utilisateur télécharger pdf

7226/26F

3/4” Offset Bottom Pivot

Improper pivot set installation can lead to personal injury or property damage. Follow

all instructions carefully. For questions contact Technical Support at 1-888-371-7331.

CAUTION

1. Prepare and mortise bottom of door and floor to receive pivot set. Determine pivot location

using dimensions on reverse side. Be sure to properly locate and mark pivot center

point of the base plate. The bottom pivot set is non-handed. The pivot shaft will thread into

either side of door leaf. To determine hand of door, see diagrams above.

2. Prepare bottom of door: Locate, drill, and tap 1/4-20 mounting holes for metal door. Locate and

drill pilot holes for #14 wood screws for wood door. Mount door leaf in bottom of door with 1/4-20

x 3/4” FHMS or #14 FHWS screws provided. Drill 7/16” dia. x 3/4” deep holes for base plate

mounting. Insert and secure anchor pins, then mount base plate to floor with screws provided.

3. At this point, hang door. Refer to instruction sheet packed with top pivot for details.

4. If height adjustment is necessary for proper door clearance, adjust bottom pivot as follows:

A. Loosen set screw using 3/32” Allen wrench provided (see diagram above).

B. Use 5/16” Allen wrench to adjust pivot shaft height as needed (Figure 1).

C. Tighten set screw firmly.

5. Fasten pivot cap as shown. Secure with cap screw.

Figure 1

Right hand

installation

Left hand

installation

Right hand

installation shown;

left hand opposite

Base plate

Pivot shaft

3/32” set

screw

Door leaf

Pivot cap

Cap screw

Installation Instructions

1 2

Installation Instructions 1
26360-00 2

Résumé du contenu

Page 1 - Installation Instructions

7226/26F 3/4” Offset Bottom PivotImproper pivot set installation can lead to personal injury or property damage. Followall instructions carefully. For

Page 2 - 26360-00

26360 Rev. 4It is very important for installer to verify that center line of top pivot point lines upwith center line of bottom pivot point before fin

Commentaires sur ces manuels

Pas de commentaire

Ives Offset Top Pivot 7226/26F Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Meubles Ives Offset Top Pivot 7226/26F. Ives Offset Top Pivot 7226/26F User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Meubles Ives Offset Top Pivot 7226/26F